High Current Relay · M83536/22 candidate configuration reference
2TN-AX2B-S
M83536/22-015M
3PDT 10A hermetically sealed relay
2TN-AX2B-S is a 3PDT 10A hermetically sealed 2TN relay with a 12 Vdc nominal coil and 70 Ω minimum coil resistance at 25°C. Solder pins (A); horizontal flange (X); internal suppression (S). Datasheet cross-reference: M83536/22-015M, candidate configuration only. It does not establish full electrical or dimensional interchangeability, MIL qualification, or a certified failure rate; qualification is subject to confirmation.
10A at 28Vdc or 115Vac / 400Hz · coil 12 Vdc
Product render for the selected code; see the linked datasheet drawings for dimensions and terminal geometry.
Datasheet values · Revision on attached PDF
2TN-AX2B-S
technical specifications
Values below are taken from the product datasheet associated with this part number. Qualification-specific limits remain governed by the controlled PDF.
- Part number
- 2TN-AX2B-S
- HI-G series / cross-reference
- 2TN Series
- Qualification
- M83536/22 candidate configuration reference
- Coil code
- 2
- Nominal coil voltage
- 12 Vdc
- Maximum coil voltage
- 14.5 Vdc
- Coil resistance at 25°C
- 70 Ω minimum
- Pick-up / hold / drop-out at 25°C
- 6.6 / 3.3 / 0.75 Vdc
- Pick-up / hold / drop-out, −65 to +125°C
- 9 / 4.5 / 0.5 Vdc
- High-temperature pick-up maximum
- 9.9 Vdc
- Continuous electrical test pick-up maximum
- 11.25 Vdc
- MIL cross-reference status
- M83536/22-015M — candidate configuration only; does not establish full electrical or dimensional interchangeability, MIL qualification, or a certified failure rate.
- Requested failure-rate level
- HI-G B / MIL M; the datasheet lists 1.0% per 10,000 cycles. Qualification is subject to confirmation.
- Terminal style
- Solder pins (code A)
- Mounting style
- Horizontal flange (code X)
- Internal suppression
- Fitted (code S)
- Contact configuration
- 3PDT
- Resistive contact rating
- 10A at 28Vdc or 115Vac / 400Hz
- Inductive / motor / lamp
- 6A / 4A / 2A
- Contact resistance
- 50mΩ typical
- Operate / release time
- 10ms max. / 10ms max. at 25°C
- Dielectric strength
- 1000Vrms at sea level
- Insulation resistance
- 1000MΩ min. at 500Vdc
- Rated life
- 100,000 operations at resistive load
- Operating temperature
- −65°C to +125°C
- Shock
- 200g, 6 ±1ms
- Vibration
- 30g, 10–2000Hz
- Sealing
- All-welded, hermetically sealed
- Weight
- 28g typical
Technical document · PDF
2TN Series technical datasheet
Electrical characteristics, coil data, contact ratings, environmental limits, terminal styles, dimensions and ordering information for 2TN-AX2B-S.
HI-G · MIL · competitor codes
Part number cross-reference
HI-G part number: 2TN-AX2B-S. MIL code: M83536/22-015M. The entries below are family-level cross-reference candidates from the HI-G comparison table. They do not confirm interchangeability or qualification; verify coil, contacts, terminals, mounting and ratings against the applicable datasheet.